Description
Our Internal Fit PTFE Glides work wonders with the Sapphire Titanium wands
–BOTH metal lips MUST be removed from the wand head in order to fit out Glide as of 9/2022
-All new one inch dowel size lets you get closer to the baseboard
-Far better vacuum performance and MUCH easier to use compared to the OEM glide
I highly recommend using 80 degree jets on the ends rather then the stock 95’s to reduce overspray
Easy to install!
Hard Surface Brush Glide option available!
Watch this video to see how to remove the metal lipps off your wand-
If your Glide is a bit loose or too tight, watch this video:
Slot Glides– The best choice for dirtier carpet that has debris in or on it and for cleaners who prefer some resistance or grab at the carpet to wand interface. Also, our Slots have recessed bridges so there are no lines left in the carpet when the glide is new. As the face of the Glide wears down the bridges can be recessed again with a knife, razor or Dremel tool.  FYI, 80% of our Glide sales are Slots.
Hole Glides- The easiest to push and the best choice for cleaners suffering from back pain, elbow, wrist, and shoulder issues and for those wanting the quickest dry times. Holes are also great for cleaning area rugs on location as the rug won’t lift up as you clean the edges and corners. Optimum for wool carpet and rugs. Dry soil removal prior to wet extraction is a must in most cases. The best choice for #3 blower truckmounts portable extractors too!
Hybrid Glides-Â Fits in between the two above, easier (some say much easier) to push than a Slot but dries slower than a Hole. Wands with large vacuum chambers such as Evolutions, SharpShooters, AW29s and the PMF Mach 12 &15 perform noticeably better with a Hybrid. Some debris can be extracted through the slot portion of the vacuum pattern, unlike our Hole pattern, but dry extraction is still recommended. This style leaves lines on some pile types and may need to be groomed after cleaning
Reviews
There are no reviews yet